Product Description :
Material: Plastic & Aluminum
Working power: 60W
Working voltage: 100 to 240V
Working temperature: 356 to 392℉
Warm-up time: 3-5 minutes
Keep clean of the glue sticks to avoid impurity block the nozzle, and do not pull out of the remanent glue sticks after each time using.
To avoid get an electric shock during using, do not use in humid environment and keep it away from children.
The remaining pressure inside the glue gun will push a little molten glue out of the gun even stop use, so to save your glue, please control release the trigger or cut off the power in advance.
Cut off the power when stop using, and never try to disassemble the melt glue gun in any case.
If the strip is left after use, please don't pull it off, just let it in the gun for the next use.
It is normal for some glue flowing out after the few seconds you finish working because of the inertia pressure.
Diameter of the glue strips should between 0.27-0.29 inches. If the applied stick doesn't match, the glue gun may be damaged.
Note: Product delivery duration may vary due to product availability in stock.
Disclaimer: The actual color of the physical product may slightly vary due to the deviation of lighting sources, photography or your device display settings.